minimalist
03-25 09:05 AM
RFE and NOID come with a color sheet of paper with your details and some USCIS internal codes for your case. You can respond by yourself and put the sheet on top - this is for the mailroom to handle your case
If we do not use G28 to change representation from current lawyer hired by company, would all the notifications go just to the lawyer?
Can we submit G28 ourselves or does it needs to be a lawyer?
If we do not use G28 to change representation from current lawyer hired by company, would all the notifications go just to the lawyer?
Can we submit G28 ourselves or does it needs to be a lawyer?
ramaonline
02-28 07:17 PM
You can find some good info on the msn R2I message boards
http://groups.msn.com/R2IClub/general.msnw
http://groups.msn.com/R2IClub/general.msnw
karthic
12-18 03:53 PM
Hi All,
I am currently working for a University in cap-exempt H1B (company A). I got a job offer from a cap-subjected company (company B). I am aware that the H1B which i have is non-transferable and i have to apply for new H1B petition to work for company.
Since the cap numbers are still available, applying for new petition is not a problem. I was in an idea of asking my new employer (company B) to apply for new H1B petition (premium processing) while working with Company A but i came to know the following from USCIS official document that i have to stop working for the current employer before submitting the company B H1B petition. I thought I can work for the cap-exempt company A until the company B H1B is approved. Have anyone experienced it? if so when should i stop working for my current cap-exempt employer?...can i work till the LCA is approved..?
Below is the paragraph from USCIS Memo
"If the H-1B alien beneficiary has not �ceased� to be employed in a cap-Exempt position, then he or she will not be counted towards the cap.
If the H-1B alien beneficiary has �ceased� to be employed in a cap-exempt position, then the alien will be subject to the H-1B numerical limitation, and the concurrent employment petition may not be approved unless a cap number is available to the alien beneficiary.
I am currently working for a University in cap-exempt H1B (company A). I got a job offer from a cap-subjected company (company B). I am aware that the H1B which i have is non-transferable and i have to apply for new H1B petition to work for company.
Since the cap numbers are still available, applying for new petition is not a problem. I was in an idea of asking my new employer (company B) to apply for new H1B petition (premium processing) while working with Company A but i came to know the following from USCIS official document that i have to stop working for the current employer before submitting the company B H1B petition. I thought I can work for the cap-exempt company A until the company B H1B is approved. Have anyone experienced it? if so when should i stop working for my current cap-exempt employer?...can i work till the LCA is approved..?
Below is the paragraph from USCIS Memo
"If the H-1B alien beneficiary has not �ceased� to be employed in a cap-Exempt position, then he or she will not be counted towards the cap.
If the H-1B alien beneficiary has �ceased� to be employed in a cap-exempt position, then the alien will be subject to the H-1B numerical limitation, and the concurrent employment petition may not be approved unless a cap number is available to the alien beneficiary.
GC_1000Watt
12-03 04:50 PM
Dude! Just go with confidence and you'll be fine. Have all the documents with you. Have your pay-stubs handy with you.
I attended visa interview at Mumbai consulate during last week of Aug. 2010. I was asked questions on my client, my job responsibilities and was asked how does my H1B holding company supervises my work at client site.
I was also asked to show my last 3 pay-stubs. Good luck!
Thanks!
Hello All,
I heard from my employer that many people who are visiting India for H1B Stamping are getting stuck with 221G query. My company lawyers have suggested us to cancel or postpone all the travel plans to India.
Did any of you have any recent stamping experience at Mumbai Consulate? I would appreciate if you can share it on this forum.
Thanks,
GreenMe
I attended visa interview at Mumbai consulate during last week of Aug. 2010. I was asked questions on my client, my job responsibilities and was asked how does my H1B holding company supervises my work at client site.
I was also asked to show my last 3 pay-stubs. Good luck!
Thanks!
Hello All,
I heard from my employer that many people who are visiting India for H1B Stamping are getting stuck with 221G query. My company lawyers have suggested us to cancel or postpone all the travel plans to India.
Did any of you have any recent stamping experience at Mumbai Consulate? I would appreciate if you can share it on this forum.
Thanks,
GreenMe
more...
veni001
08-26 05:03 PM
AFAIK, if the MS degree is from an US accredited institution and your new EB-2 job requires a MS degree, then yes, your new employer can start the EB-2 process for you. Once you have a US Masters, it doesn't matter what your earlier educational qualifications are. Key thing here is that your EB-2 job MUST require a Masters degree.
.....and none of the accredited universities give you admission to MS unless you have bachelor's degree, and most of the online MS degrees are not from ABET accredited universities, please get all the information about the degree before you pay any FEE:o
.....and none of the accredited universities give you admission to MS unless you have bachelor's degree, and most of the online MS degrees are not from ABET accredited universities, please get all the information about the degree before you pay any FEE:o
abhi_jais
12-03 02:59 PM
A friend of mine has got 221G from the New Delhi consulate. He works directly for the company there is no client involved here. The consulate has requested the details of every single employee of the company along with their immigration status. My friend is trying to get that information from the employer.
Any suggestion at this point????
Any suggestion at this point????
more...
gcgreen
07-17 03:59 PM
165/hr is peanuts man. lawyers are EXPENSIVE. period.
Isn't $165/hour a steep rate?
Isn't $165/hour a steep rate?
urstruly
07-27 12:42 AM
485 was approved on 7/26/07. Wife's 485 was delivered by Fedex to Nebraska Service Center on 7/19/07.
Is wife OK and does this mean her 485 is pending(even though receipt is not sent by USCIS yet) or she is going to be out of status???
Thanks,
Is wife OK and does this mean her 485 is pending(even though receipt is not sent by USCIS yet) or she is going to be out of status???
Thanks,
more...
vban2007
07-13 01:38 PM
Please delete this TOPIC
krishna_brc
02-15 11:26 PM
Hi,
Can someone please clarify with AC21 can I take up a job Position as "IT PROJECT MANAGER 11-3021.00" whereas my EB3 Labor is filed as "Computer Programmers - 15-1021.00" ?
My I-485 is still pending past 180 days and I-140 is approved.
Thanks so much in advance for replying.
You can take any job as long as the duties of the new job falls under the
Job Code 15-1021.00. which is your original approved labor job code.
Any thing other than that is a straight NO.
ALSO PLEASE UPDATE YOUR PROFILE
Can someone please clarify with AC21 can I take up a job Position as "IT PROJECT MANAGER 11-3021.00" whereas my EB3 Labor is filed as "Computer Programmers - 15-1021.00" ?
My I-485 is still pending past 180 days and I-140 is approved.
Thanks so much in advance for replying.
You can take any job as long as the duties of the new job falls under the
Job Code 15-1021.00. which is your original approved labor job code.
Any thing other than that is a straight NO.
ALSO PLEASE UPDATE YOUR PROFILE
more...
MatsP
May 18th, 2005, 07:28 AM
I'm having a problem with a Nikon d100 camera taking the necessary pictures for a high dynamic range photo. I need to take 3 pictures in a short ammount of time (which I can do, using the bracket setting) but I need to vary the shutter speed manually in this setting, with a different exposure time for each of the 3 pictures taken in the bracket. Is there any way that I can do this, or any software that will allow me to accomplish this?
Thanks,
Trish
As far as I know, this is exactly how the automatic bracketing mode works. Or at least, on the Canon cameras, that's what it does. Just set that the camera takes a +2, 0 and -2 exposure (I'd suggest using two stops, as you want to make a noticable difference between the shots, otherwise the "extension" of the range will be more or less useless).
However, I'm not entirely sure whether the camera will adjust the shutter speed or aperture, or both. It may well depend on which mode you set the camera to in the first place (Program mode -> change both, Shutter Priority -> change aperture [you set the time, so the camera changes the aperture to match], Apterure Priorty -> Change shutter speed [you set the aperture, the camera adjusts the time to match]).
Alternatively, if you use manual mode (and of course, no automatic bracketing available in manual mode), and set it to the "two stops shorter" time, you should be able to relatively quickly do "two clicks" on the dial that adjusts the time. Then do two clicks more. [of course, two stops is probably more than two clicks, but you get the idea].
--
Mats
Thanks,
Trish
As far as I know, this is exactly how the automatic bracketing mode works. Or at least, on the Canon cameras, that's what it does. Just set that the camera takes a +2, 0 and -2 exposure (I'd suggest using two stops, as you want to make a noticable difference between the shots, otherwise the "extension" of the range will be more or less useless).
However, I'm not entirely sure whether the camera will adjust the shutter speed or aperture, or both. It may well depend on which mode you set the camera to in the first place (Program mode -> change both, Shutter Priority -> change aperture [you set the time, so the camera changes the aperture to match], Apterure Priorty -> Change shutter speed [you set the aperture, the camera adjusts the time to match]).
Alternatively, if you use manual mode (and of course, no automatic bracketing available in manual mode), and set it to the "two stops shorter" time, you should be able to relatively quickly do "two clicks" on the dial that adjusts the time. Then do two clicks more. [of course, two stops is probably more than two clicks, but you get the idea].
--
Mats
santiwar
07-24 11:15 PM
I contributed once in the past for (100 Bucks). I am feeling the pinch lately because of all these I-485 filing expenses ( i know, it does sound like a lame excuse :p ). Rest assured, will be contributing in the future..
more...
ita
11-12 09:40 AM
Go online and file AR11 right away, by giving out your pending case numbers you can update the address. After an hour or so, call USCIS customer service and verify whether the address has updated or not; also ask them to resend the card to your new address. You will receive a address change confirmation letter at your new address.
I went online to change address.
It didn't ask for pending case#'s anywhere.
I tried calling customerservice but I get this message that CSR work only between 8-6 Mon-Fri and is asking me to call back later though I called at 10am.
I went online to change address.
It didn't ask for pending case#'s anywhere.
I tried calling customerservice but I get this message that CSR work only between 8-6 Mon-Fri and is asking me to call back later though I called at 10am.
mdcowboy
12-18 02:16 PM
Hi Goel_Ar, thanks for the response. Assuming there is indeed very good co-ordination between USCIS and SSN office, how long does it *normally* take to get the card?
Any ideas, anyone?
They say it takes 10-14 business days but my Wife got it within 7 business days. hope this helps.
Any ideas, anyone?
They say it takes 10-14 business days but my Wife got it within 7 business days. hope this helps.
more...
newbie2020
08-11 09:47 AM
Since it is a new H1 I would say unless the petitioning employer is not co-operating, Then you don't have any other choice. You need to wait until next April for new H1.
Did u try to go to another consulate, Say Mumbai or Chennai or Kolkata.
I am not sure if that would work, since i have heard that consulate will sometimes hold the passport and/or stamp on the back that this application was received.
If you are able to go to another consulate go ahead and check your luck, sometimes they don't ask anything for documentation (This happened with me twice)
Did u try to go to another consulate, Say Mumbai or Chennai or Kolkata.
I am not sure if that would work, since i have heard that consulate will sometimes hold the passport and/or stamp on the back that this application was received.
If you are able to go to another consulate go ahead and check your luck, sometimes they don't ask anything for documentation (This happened with me twice)
bbct
04-16 11:21 AM
That really sucks.
They (USCIS) take ages to work on our case and when they request something they don't give enough time to respond and even ignore genuine hardship.
I pray sincerely things work out for you. Good luck!
bbct & vin13,
Thank you both for your replies! We are trying to figure out what to do.
She is travelling with our twins and my father. Seems like there is no way other than for her to do a flying visit or to prepone the trip for everybody.
Thanks,
GCisaDawg
They (USCIS) take ages to work on our case and when they request something they don't give enough time to respond and even ignore genuine hardship.
I pray sincerely things work out for you. Good luck!
bbct & vin13,
Thank you both for your replies! We are trying to figure out what to do.
She is travelling with our twins and my father. Seems like there is no way other than for her to do a flying visit or to prepone the trip for everybody.
Thanks,
GCisaDawg
more...
amitjoey
12-12 03:41 PM
Hi all,
This forum is full of smart people. So I want to throw my situation out there to get some advice from all of you. I am into 7th year of my H1 with by labor with PD of Sep 2002. At the rate things are moving, I am running out of patience here.
Things took an interesting turn last week, when a mid sized Software co. is willing to outsource me some of their work. Given the size of the opportunity, I will need to go to India to setup a team of 5 to 6 ppl. The co. is pretty eager and willing to offer some of the finanical guarantees I have asked for.
So my question is, should I take this opportunity and say good bye to GC? Or I should be patient as there may be a need to be in US to grow my outsourcing biz, in case it jump starts well. What would you do if you were presented this opportunity and you had the enterpreurial spirits to pull it off.
I would be eager to see what people say here.
You really do not have to say good bye to GC. If your labor has been cleared, you can apply I-140 Premium processing with your present company. Apply perm and I-140 with this new mid sized company. Transfer PD to new I-140 with new company. Go to India to start your company have them outsource to you. GC is for future anyways, work on your new enterprise in India for 1-2-3 years untill your pd becomes current (whenever that happens). At that point you have an option to file I-485. You can still continue in India, with an option to returning or decide at that point if you want to stay in the USA for 2-3 months every-year to maintain GC for 5 years to become US Citizen.
This forum is full of smart people. So I want to throw my situation out there to get some advice from all of you. I am into 7th year of my H1 with by labor with PD of Sep 2002. At the rate things are moving, I am running out of patience here.
Things took an interesting turn last week, when a mid sized Software co. is willing to outsource me some of their work. Given the size of the opportunity, I will need to go to India to setup a team of 5 to 6 ppl. The co. is pretty eager and willing to offer some of the finanical guarantees I have asked for.
So my question is, should I take this opportunity and say good bye to GC? Or I should be patient as there may be a need to be in US to grow my outsourcing biz, in case it jump starts well. What would you do if you were presented this opportunity and you had the enterpreurial spirits to pull it off.
I would be eager to see what people say here.
You really do not have to say good bye to GC. If your labor has been cleared, you can apply I-140 Premium processing with your present company. Apply perm and I-140 with this new mid sized company. Transfer PD to new I-140 with new company. Go to India to start your company have them outsource to you. GC is for future anyways, work on your new enterprise in India for 1-2-3 years untill your pd becomes current (whenever that happens). At that point you have an option to file I-485. You can still continue in India, with an option to returning or decide at that point if you want to stay in the USA for 2-3 months every-year to maintain GC for 5 years to become US Citizen.
Nagireddi
08-20 08:53 PM
EB2
My priority date Dec 2005
I140 approved
I485 filed at NSC-August 2007
Still waiting.................
My priority date Dec 2005
I140 approved
I485 filed at NSC-August 2007
Still waiting.................
bekugc
03-07 10:26 AM
can somebody pls answer the above qns?
thanks
thanks
abhaykul
03-28 10:58 AM
You may have submitted your papers in Jan 2007 but make sure your lawyer forwarded it in Jan 2007. Check for the date Received on the approval notice.
For my recent H1B extention for 7th year extention, I have come across strange situation.
My old H1B was valid till 5th Feb 2007. Extention was applied in Jan 2007 with approved I-140. Recently I have received approved H1B extention with new I-94, but it states validity is from 22 March 2007 to 5th Feb 2010.
I thought the extention should have been from 6th Feb 2007 to 5th Feb 2010.
what should be infered from above ? Does it mean that I was out of ststus fron 6th Feb 2007 till 21st March 2007.
I would appereciate any input on this.
If this makes me out of status , is there a way to fix this by contacting USCIS again ?
Thanks
Saurav
For my recent H1B extention for 7th year extention, I have come across strange situation.
My old H1B was valid till 5th Feb 2007. Extention was applied in Jan 2007 with approved I-140. Recently I have received approved H1B extention with new I-94, but it states validity is from 22 March 2007 to 5th Feb 2010.
I thought the extention should have been from 6th Feb 2007 to 5th Feb 2010.
what should be infered from above ? Does it mean that I was out of ststus fron 6th Feb 2007 till 21st March 2007.
I would appereciate any input on this.
If this makes me out of status , is there a way to fix this by contacting USCIS again ?
Thanks
Saurav
franklin
07-21 08:33 PM
I did a very similar thing.
My h1b expires in sept 07, and an extension was applied in april 07. My PD became current in June, and I applied for AOS with AP and EAD.
Approval for my H1B extension came through mid June (after AOS application) and only for 1 year (as opposed to 3 if my PD was not current).
I now have AP approval and EAD is still pending, but I'm planning on using these to travel with when fully realized.
My h1b expires in sept 07, and an extension was applied in april 07. My PD became current in June, and I applied for AOS with AP and EAD.
Approval for my H1B extension came through mid June (after AOS application) and only for 1 year (as opposed to 3 if my PD was not current).
I now have AP approval and EAD is still pending, but I'm planning on using these to travel with when fully realized.